Abies alba
Investigating the effect of diameter and dowel surface in softwood joints, made by welding and glue [Volume 32, Issue 4, 2017-2018, Pages 598-605]
Acetylation
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
Acid hydrolysis
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017-2018, Pages 300-310]
Acoustic
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Adhesion
Improvement of adhesion strength of polyurethane and alkyd coatings by nano-silane using sol-gel method [Volume 32, Issue 3, 2017-2018, Pages 322-333]
Adhesion strength
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017-2018, Pages 205-214]
Analytic network process
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
Anionic Charge
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
Ansys software
The effect of the type of chair connection on the stress distribution and structural failure by to finite element method [Volume 32, Issue 1, 2017-2018, Pages 106-117]
Atomic Adsorption
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
B
Bagasse
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
Bagasse
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017-2018, Pages 509-517]
Bagasse Soda Black Liquor
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017-2018, Pages 498-508]
Bending strength
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
Benomyl
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017-2018, Pages 131-144]
BHT
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
Biorefinery
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017-2018, Pages 498-508]
Black liquor
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
Bleaching Stage
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
Bleaching Stage
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
C
Calcium carbonate
The effect of water softening calcium carbonate on the fluting paper properties from OCC and NSSC [Volume 32, Issue 1, 2017-2018, Pages 118-130]
Carpinus betulus
Investigation and compare the tensile strength of hardwood dowel joints, made by glue and welding [Volume 32, Issue 3, 2017-2018, Pages 382-391]
Cationic polymers
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
CELLULOSE
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017-2018, Pages 300-310]
Cellulose Nanocrystal
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017-2018, Pages 300-310]
Cell Wall WPC
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017-2018, Pages 436-449]
CMP
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
CMP pulp
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
Composite
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
Composite
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017-2018, Pages 157-170]
Composite
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017-2018, Pages 450-461]
Composite
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
Contact angle
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017-2018, Pages 238-250]
Contact angle
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
Coupling agent
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017-2018, Pages 157-170]
D
Diffusion theory
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017-2018, Pages 486-497]
Drainability
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017-2018, Pages 227-237]
E
ECF
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
EDTA
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
Ethylene / propylene / Diane / monomer
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017-2018, Pages 157-170]
Evaporator
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017-2018, Pages 565-575]
F
Fiber cement
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017-2018, Pages 450-461]
Fillers
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
Finite element method
The impact of truss structure on stiffness by finite element method [Volume 32, Issue 1, 2017-2018, Pages 69-82]
Finite element method
The effect of the type of chair connection on the stress distribution and structural failure by to finite element method [Volume 32, Issue 1, 2017-2018, Pages 106-117]
FTIR
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
FTIR
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
FT-IR
The effect of recycling process on the chemical properties and wettability of obtained fibers from MDF wastes [Volume 32, Issue 4, 2017-2018, Pages 553-564]
Functionalization
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
Fungicide
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017-2018, Pages 261-274]
G
Gas chromatography
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Graphene oxide
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
H
Holding Time
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
Hygro-Thermal Modification
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
I
Industrial wood chips
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
Internal bonding
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
K
Keywords: Particleboard
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
Keywords: Particleboard
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
Kurdistan
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
L
LAMINATED VENEER LUMBER
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
Layer by layer (LBL)
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
Layer-by-layer technique
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017-2018, Pages 57-68]
LIGNIN
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017-2018, Pages 565-575]
LIGNIN
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
LIGNIN
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017-2018, Pages 518-529]
M
MAPLE
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017-2018, Pages 205-214]
MAPP. nanoclay
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017-2018, Pages 287-299]
Mass spectrometry
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
MECHANICAL PROPERTIES
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
MECHANICAL PROPERTIES
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
MECHANICAL PROPERTIES
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
Metallic Ions
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
MIC
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017-2018, Pages 131-144]
Micro- cellulose
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
Modulus of elasticity
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
Moisture
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Multi walled Carbon Nanotube
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
MWCNT
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
N
Nanobentonite
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017-2018, Pages 227-237]
Natural weathering
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017-2018, Pages 509-517]
Non-destructive
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
O
Oak
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Old corrugated container
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017-2018, Pages 227-237]
Online control
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Optical and mechanical properties
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
Optical and mechanical properties
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
Organic biocides
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
Organic compounds
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Oxygen
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
P
PAPER
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017-2018, Pages 261-274]
PAPER
The assessment of antifungal effect of Thiophanate-methyl on Paper destructive fungi and its application in conservation paper works [Volume 32, Issue 3, 2017-2018, Pages 345-358]
Paper Coating
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017-2018, Pages 498-508]
Paper properties
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
Paper properties
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017-2018, Pages 238-250]
Paper relics
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017-2018, Pages 131-144]
PARTICLE BOARD
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
PHYSICAL
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017-2018, Pages 94-105]
PHYSICAL AND MECHANICAL PROPERTIES
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
PHYSICAL AND MECHANICAL PROPERTIES
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
PHYSICAL AND MECHANICAL PROPERTIES
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017-2018, Pages 402-410]
Plate
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
Polycrease ECR
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017-2018, Pages 33-46]
Polycrease ECR (mDMDHEU)
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017-2018, Pages 436-449]
Polyurethane
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017-2018, Pages 205-214]
Poplar
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017-2018, Pages 33-46]
Poplar
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
Poplar (Populus deltoides)
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
Populus
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
POPULUS DELTOIDES
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017-2018, Pages 25-32]
R
Recycled polypropylene
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
Regrind
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017-2018, Pages 402-410]
Resin dosage gradient
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
Resin dosage gradient
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
Rose flower stalks
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
Rosin
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017-2018, Pages 238-250]
Roughness
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
S
Salix
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
SEM
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
Soda pulp
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
Spectroscopy
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017-2018, Pages 145-156]
Staple
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
STATIC BENDING
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
Steamed fiber
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
Step wise Regression
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
Strength
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
Strength properties
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017-2018, Pages 57-68]
Strength properties
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
Structural characterization
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
Surface checks
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017-2018, Pages 486-497]
Synergism
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
T
Talc
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
TCF
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
TCF Bleaching
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
Thermal modification
Effect of thermal modification on physical and mechanical behavior of sunflower-polypropylene composites [Volume 32, Issue 3, 2017-2018, Pages 392-401]
Thermal stability
Effect of thermal modification on physical and mechanical behavior of sunflower-polypropylene composites [Volume 32, Issue 3, 2017-2018, Pages 392-401]
Thiophanate methyl
The assessment of antifungal effect of Thiophanate-methyl on Paper destructive fungi and its application in conservation paper works [Volume 32, Issue 3, 2017-2018, Pages 345-358]
Timoshenko beam theory
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Titanium dioxide
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
TRAMETES VERSICOLOR
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
U
Upholstered furniture
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
Urea formaldehyde resin
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
V
Value chain
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
Vibration
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Vibration
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
W
Wet tensile strength
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
WHEAT STRAW
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017-2018, Pages 94-105]
WHEAT STRAW
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
Withdrawal strength capacity
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
Wood and Paper
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017-2018, Pages 565-575]
WRV
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017-2018, Pages 518-529]
X
XRD
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
Z
Zeolite
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
